Držáky a stativy

Podložka vyrobená z protiskluzového materiálu, velikost 100 x 120 cm. Ideální do zavazadlového prostoru osobního automobilu. Díky velmi přilnavému povrchu zabraňuje volnému pohybu předmětů, které by jinak volně klouzaly. Velikost podložky lze jednoduše přizpůsobit zastřižením.

Držák, s extra silnou přísavkou, pro uchycení telefonu až do šířky (nebo výšky) 10 cm. Šířku lze zvětšit stisknutím bočního tlačítka, telefon se poté umístí do držáku a ten se poté zajistí stiskem čelistí. Díky uzamykatelnému otáčení o 360° a flexibilnímu ramenu držáku, je možné snadno nastavit vhodnou polohu telefonu. Telefon v klipsu pevně drží díky důmyslnému mechanismu, proti poškrábání je upnutý telefon chráněn pěnovými prvky. Technická data pro telefony do 10 cm (šířka nebo výška) nastavitelný úhel ano, 360° upevnění přísavka s aretací barva černá

Univerzální držák telefonu řady LUKE pro upevnění do mřížky ventilace a umístěním telefonu jednou rukou. Držák je opatřen gravitačním systémem uchycení telefonu, kdy telefon svojí vahou působí na spodní rameno držáku, díky čemuž se stáhnou boční ramena, která telefon upevní. Tělo držáku je dále opatřeno kloubem s aretačním prstencem, díky kterému je možné držák nastavit pro potřebný sledovací úhel a dotažením zajistit. Držák lze navíc rozšířit, co do možnosti uchycení, dokoupením některé z nabízených patek držáků řady LUKE (06321 s aretací do mřížky, 06322 klipovou patku, s aretací pomocí přísavky 06323 s nastavitelným, 06324 pevným, ale i 06325 ohebným ramenem). Technická data Vhodné pro telefonydo 6,5" (šířka 65-95 mm)Umístěnímřížka ventilaceUchycení telefonugravitační systémOtáčeníkloubem s aretacíBarvachrom

Univerzální držák telefonu řady LUKE pro upevnění do mřížky ventilace a umístěním telefonu jednou rukou. Držák je opatřen gravitačním systémem uchycení telefonu, kdy telefon svojí vahou působí na spodní rameno držáku, díky čemuž se stáhnou boční ramena, která telefon upevní. Tělo držáku je dále opatřeno kloubem s aretačním prstencem, díky kterému je možné držák nastavit pro potřebný sledovací úhel a dotažením zajistit. Držák lze navíc rozšířit, co do možnosti uchycení, dokoupením některé z nabízených patek držáků řady LUKE (06321 s aretací do mřížky, 06322 klipovou patku, s aretací pomocí přísavky 06323 s nastavitelným, 06324 pevným, ale i 06325 ohebným ramenem). Technická data Vhodné pro telefonydo 6,5" (šířka 65-95 mm)Umístěnímřížka ventilaceUchycení telefonugravitační systémOtáčeníkloubem s aretacíBarvazelená

Speciální nastavitelná patka s teleskopickým ramenem a přísavkou pro držáky telefonů řady LUKE. Patka je složena z masivní přísavky a úhlově nastavitelného, teleskopického ramene s šroubovacím zajištěním pozice. Pro lepší schopnost přísavky je v balení umístěna i samolepící podložka s průměrem 72 mm. Rameno lze nastavit v úhlu 180° a teleskopicky lze nastavit délku 11-16 cm. Zakončení patky je opatřeno kloubem, na který lze upevnit libovolný LUKE držák telefonu.

Držák Steel Cannon od Baseus lze umístit na jakýkoli typ ventilační mřížky. Držák samotný v místech, kde drží telefon, je pokrytý měkčeným materiálem, pro pevné uchycená bez strachu z poškrábání telefonu Pružinový mechanismus umožňuje umístit telefony o šířce 5,6 cm až 8,5 cm. Vlastnosti - Univerzální držák - Automaticky nastavitelný - Měkčený materiál pro spolehlivý úchop telefonu - Otočný o 360 stupňů - Pro zařízení o šířce 5,5 cm až 8,5 cm - Silné a stabilní uchopení telefonu

Praktický držák telefonu s nastavitelným ramenem a pogumovanými čelistmi pro upevnění.Do držáku je možné umístit telefon šíře 6,5 - 10 cm a je připevněn na kulovém kloubu jištěném maticí. Po povolení matice je možné nastavit libovolný sledovací úhel.Konstrukce je tvořena nastavitelným ramenem opatřeným dvěma klouby s ovládáním pomocí tlačítek. Tvar ramene lze jednoduše nastavit stisknutím tlačítek kloubů a uvolněním v požadované pozici, kde bude následně pevně aretován.Komplet držáku lze uchytit například na tyč hlavové opěrky, na zpětné zrcátko, na stůl a další podklady max. šíře/průměr 25 mm. Čelisti jsou opatřené gumovými vložkami, které brání poškození povrchu. Pro pevné uchycení pak slouží aretační prstenec ve spodní části, kde je navíc umístěn otočný prvek pro otáčení celého kompletu držáku.Technická datapro telefony (šířka)6,5 – 10 cmnastavitelný úhelano, 360°upevněnípomocí čelistí, max 25 mm

Držák telefonu s extra silnou přísavkou a klipsem pro uchycení telefonu či navigace až do šířky (nebo výšky) 10 cm. Díky možnosti otáčení o 360° je možné snadno nastavit vhodnou polohu. Telefon v klipsu pevně drží pomocí silné pružiny, a proti pohybu je zajištěn pomocí protiskluzové vrstvy uvnitř klipsu.

Držák pro telefon k upevnění na opěrku hlavy.Rozsah úchytu pro telefon 5 - 9 cm. Díky těmto rozměrům, je možné použít tento držák pro většinu mobilních telefonů na trhu.Držák telefonu lze díky vysouvacímu ramenu úhlově nastavit a lze jím otáčet okolo osy tyčky hlavové opěrky. Držák lze na hlavové opěrce zajistit pomocí vrchního otočného prstence. Ovládání a sledování obrazu mobilního telefonu na zadním sedadle bude snadné a pohodlné i na dlouhých cestách. Držák je navíc opatřen výstupkem pro možnost uchycení tašky s lehkým obsahem. Technická data rozsah úchytu telefonu5-9 cmnastavitelný úhelano, pomocí rameneotočnéanozajištěníano, prstencem

Speciální patka s přísavkou a flexibilním ramenem pro držáky telefonů řady LUKE.Patka je složena z masivní přísavky a libovolně nastavitelného ramene. Pro lepší schopnost přísavky je v balení umístěna i samolepící podložka s průměrem 72 mm.Flexibilní rameno má délku 17 cm.Zakončení ramene je opatřeno kloubem, na který lze upevnit libovolný LUKE držák telefonu.

Univerzální držák telefonu řady LUKE pro upevnění do mřížky ventilace a umístěním telefonu jednou rukou. Držák je opatřen gravitačním systémem uchycení telefonu, kdy telefon svojí vahou působí na spodní rameno držáku, díky čemuž se stáhnou boční ramena, která telefon upevní. Tělo držáku je dále opatřeno kloubem s aretačním prstencem, díky kterému je možné držák nastavit pro potřebný sledovací úhel a dotažením zajistit. Držák lze navíc rozšířit, co do možnosti uchycení, dokoupením některé z nabízených patek držáků řady LUKE (06321 s aretací do mřížky, 06322 klipovou patku, s aretací pomocí přísavky 06323 s nastavitelným, 06324 pevným, ale i 06325 ohebným ramenem). Technická data Vhodné pro telefonydo 6,5" (šířka 65-95 mm)Umístěnímřížka ventilaceUchycení telefonugravitační systémOtáčeníkloubem s aretacíBarvarůžově zlatá

Klasická patka s přísavkou pro držáky telefonů řady LUKE. Výška patky 8 cm. Pro lepší schopnost přísavky je v balení umístěna i samolepící podložka s průměrem 72 mm. Zakončení patky je opatřeno kloubem, na který lze upevnit libovolný LUKE držák telefonu.

Plastový držák mobilního telefonu s kovovým úchytem, určený k nalepení ve voze, nebo k připevnění na žebra ventilace automobilu. Nastavitelný úhel sklonu, nastavitelná šířka. Lze použít pro většinu běžně používaných mobilních telefonů. Barva imitace dřeva.

Jedinečná podložka s velmi silnou přilnavostí, i na velmi šikmých plochách pevně drží a zajišťuje různé předměty před samovolným sklouznutím. Vysoké bočnice zadrží i rozměrnější předměty. Jedinečný tvar s výřezy na stranách umožňuje umístit telefon jako do držáku. Díky výřezům v horní i dolní části je možné položit telefon i s napájecím kabelem tak, že bočnice nepřekážejí.Pokud podložka časem díky prachu ztratí svou přilnavost, stačí ji jen omýt vlažnou vodou se saponátem a efekt přilnavosti bude obnoven.technická data: rozměry vnější10 x 15 x 2 cmrozměry vnitřní76 x 129 mmbarvačerná

Materiál silicon, extrémně vysoké protiskluzové vlastnosti. Velikost cca 10 x 15 cm. Použitím protiskluzové položky lze položit i na šikmou plochu různé předměty, aniž by samovolně sklouzávaly. Barevné provedení: černá.

Speciální klipová patka pro držáky telefonů řady LUKE. Patka je složena z klipu šíře 2 cm s délkou 3 cm. Lze ji upevnit na hranu s max. výškou 1,5 cm a pomocí křídlaté matice zajistit. Tělo patky je v zadní části opatřeno kloubem, na který lze upevnit libovolný LUKE držák telefonu.

Lehký 85 g sportovní DRŽÁK NA KOLO DP-1B  je vyroben k upevnění mobilního telefonu na řídítka kola. Otáčí se dokola a proto lze mobilní telefon nastavit podle potřeby cyklisty. Výhodou je kompatibilita se všemi pouzdry firmy DiCAPac Ac na mobilní telefony.

Speciální patka do mřížky ventilace pro držáky telefonů řady LUKE. Patka je složena ze dvou dílů. Háček jištěný posuvným členem s pružinou, pro zaháknutí za mřížku ventilace a samotný kloub s podpěrnou částí. Tyto díly stačí jednoduše zacvaknout do sebe a umístit na své místo. Tělo patky je dále opatřeno kloubem, na který lze upevnit libovolný LUKE držák telefonu.

Magnetic car holder with MagSafe wireless charging for Apple iPhone 12 and 13 series devices. Mounted to the dashboard or windshield. Spigen OneTap ITS35 is a combination of simple and quick mounting and safe, wireless Apple MagSafe charging with a power of 7.5W. The stand uses strong magnets that allow for easy assembly and disassembly of your smartphone. The minimalist, stable structure is made of high-quality metal. The handle is equipped with an extended arm and a rotating head, which ensures high comfort of use and a perfect fit at any angle. The holder comes with two magnetic plates for the charging cable (charger and cable not included). Thanks to this, you can keep your cable always at hand. The holder is attached to the dashboard or windshield. The MagSafe magnetic function works only with a phone or a case with a built-in magnetic eye with the use of MagSafe. Specification: Output voltage: 5V / 2A, 9V / 1.67A Power: 5W / 7.5W Mounting: to the dashboard or windshield Cable: not included Compatibility: devices with Apple MagSafe

A car holder with wireless charging. Automatically detects which smartphone is placed in the holder to ensure maximum watts of charge. Intelligent infrared sensor detects the phone, thanks to which the holder automatically closes. The firm fit ensures stabilization and safety of the phone even on uneven roads. After inserting, the wireless charging process will start, which can reach 15W. The holder will automatically detect which smartphone is placed in the holder to ensure maximum watts of charge. Supports Android fast charging up to 10W/15W. Can be charged in a case. LED backlight on the frame informing about the charging status. Large 360 ??degree adjustment range. The triangular design of the device allows for full phone stabilization. Soft silicone in the contact areas with the phone for the safety of devices. The set includes a double mounting system for a ventilation grille or cockpit / glass. Specification: Finish: PC, silicone Type of fastening: clamping Place of installation: air conditioning grille / cockpit / glass Compatibility: devices with a width of 55-92 mm Power: 5W 7.5W 10W 15W

The Forcell HS4 car holder mounted to the air vent is designed for devices that support inductive charging, including the latest foldable Samsung Z Flip and Fold phone series. It allows you to charge them with a power of up to 15 W. The rotating swivel and automatically extending arms (after pressing a button) make it easy to mount the smartphone. Thanks to the Forcell holder, you will always have your phone at hand during any trip. Mount the device vertically or horizontally thanks to the 360° swivel and automatically extendable arms (after pressing a button). Strong clamps and bottom legs keep the smartphone stable even during dynamic driving. Various adjustment options make it easy to adjust the holder to your own needs, which will be useful when several drivers share one car. The Forcell holder is suitable for both standard smartphones and those foldable from the latest Samsung Z Fold and Flip series. Moreover, it is mounted to the air vent, minimizing visibility problems and thus increasing safety while driving. At the same time, it supports wireless charging with a maximum power of 15 W. The set includes the 1 m charging cable with USB-C connectors. Specification:Mounting: air ventInput voltage: 5 V/2 A; 9 V/2 APower: 5 W/7.5 W/10 W/15 W (max.)Wireless charging distance: 6 mm (max.)Interface: USB-CCable: USB-C to USB-C (1 m)

Automatic car holder with wireless charging and an infrared sensor. Automatically opens and closes the arms. Supports inductive charging. Thanks to the built-in infrared sensor, the holder automatically recognizes the device when it is close to the accessory (5-20 cm), and then automatically opens and closes the arms when the phone is inside. The holder supports fast wireless charging. For devices that do not support inductive charging technology, use the supplied magnetic tips. The product has a built-in protection system: against overvoltage, overheating, magnetic field, short circuit. Mounted on the air vent or windshield. Specification: Model identifier: HS1 Material: PC, ABS Input: 5V / 2A, 9V / 1.67A Output: 5V / 1.5A, 9V / 1.2A Power: 15W, 10W, 7.5W, 5W depending on the phone model Charging frequency: ?80% 110K-205K Hz Charging efficiency:> 72% Charging distance: < 10mm Support: Qi wireless charging Arm spacing: 4.7"-7.2" Dimensions: 130 * 65 * 24 mm Cable length: 100 cm Weight: 97 g Place of installation: air vent, windshield

Automatic car holder with wireless charging and an infrared sensor. Automatically opens and closes the arms. Supports inductive charging. Thanks to the built-in infrared sensor, the holder automatically recognizes the device when it is close to the accessory (5-20 cm), and then automatically opens and closes the arms when the phone is inside. The holder supports fast wireless charging. For devices that do not support inductive charging technology, use the supplied magnetic tips. The product has a built-in protection system: against overvoltage, overheating, magnetic field, short circuit. Mounted on the air vent or windshield. Specification: Model identifier: HS1 Material: PC, ABS Input: 5V / 2A, 9V / 1.67A Output: 5V / 1.5A, 9V / 1.2A Power: 15W, 10W, 7.5W, 5W depending on the phone model Charging frequency: ?80% 110K-205K Hz Charging efficiency:> 72% Charging distance: < 10mm Support: Qi wireless charging Arm spacing: 4.7"-7.2" Dimensions: 130 * 65 * 24 mm Cable length: 100 cm Weight: 97 g Place of installation: air vent, windshield

Automatic car holder with wireless charging and an infrared sensor. Automatically opens and closes the arms. Supports inductive charging. Thanks to the built-in infrared sensor, the holder automatically recognizes the device when it is close to the accessory (5-20 cm), and then automatically opens and closes the arms when the phone is inside. The holder supports fast wireless charging. For devices that do not support inductive charging technology, use the supplied magnetic tips. The product has a built-in protection system: against overvoltage, overheating, magnetic field, short circuit. Mounted on the air vent or windshield. Specification: Model identifier: HS1 Material: PC, ABS Input: 5V / 2A, 9V / 1.67A Output: 5V / 1.5A, 9V / 1.2A Power: 15W, 10W, 7.5W, 5W depending on the phone model Charging frequency: ?80% 110K-205K Hz Charging efficiency:> 72% Charging distance: < 10mm Support: Qi wireless charging Arm spacing: 4.7"-7.2" Dimensions: 130 * 65 * 24 mm Cable length: 100 cm Weight: 97 g Place of installation: air vent, windshield

Automatic car holder with wireless charging and an infrared sensor. Automatically opens and closes the arms. Supports inductive charging. Thanks to the built-in infrared sensor, the holder automatically recognizes the device when it is close to the accessory (5-20 cm), and then automatically opens and closes the arms when the phone is inside. The holder supports fast wireless charging. For devices that do not support inductive charging technology, use the supplied magnetic tips. The product has a built-in protection system: against overvoltage, overheating, magnetic field, short circuit. Mounted on the air vent or windshield. Specification: Model identifier: HS1 Material: PC, ABS Input: 5V / 2A, 9V / 1.67A Output: 5V / 1.5A, 9V / 1.2A Power: 15W, 10W, 7.5W, 5W depending on the phone model Charging frequency: ?80% 110K-205K Hz Charging efficiency:> 72% Charging distance: < 10mm Support: Qi wireless charging Arm spacing: 4.7"-7.2" Dimensions: 130 * 65 * 24 mm Cable length: 100 cm Weight: 97 g Place of installation: air vent, windshield

Automatic car holder with wireless charging and an infrared sensor. Automatically opens and closes the arms. Supports inductive charging. Thanks to the built-in infrared sensor, the holder automatically recognizes the device when it is close to the accessory (5-20 cm), and then automatically opens and closes the arms when the phone is inside. The holder supports fast wireless charging. For devices that do not support inductive charging technology, use the supplied magnetic tips. The product has a built-in protection system: against overvoltage, overheating, magnetic field, short circuit. Mounted on the air vent or windshield. Specification: Model identifier: HS1 Material: PC, ABS Input: 5V / 2A, 9V / 1.67A Output: 5V / 1.5A, 9V / 1.2A Power: 15W, 10W, 7.5W, 5W depending on the phone model Charging frequency: ?80% 110K-205K Hz Charging efficiency:> 72% Charging distance: < 10mm Support: Qi wireless charging Arm spacing: 4.7"-7.2" Dimensions: 130 * 65 * 24 mm Cable length: 100 cm Weight: 97 g Place of installation: air vent, windshield

Automatic car holder with wireless charging function. It detects when the smartphone is close, and then opens and closes the arms. Mounting to the air vent. The handle automatically recognizes the device: with an infrared sensor. Thus, when the smartphone is close, the handle opens and closes the arms. A tight fit ensures the stabilization of the phone even on bumpy roads. After mounting the device, the wireless charging process will start automatically. It is enough that the phone supports this function. Mounting to the air vent means that the accessory does not block visibility. Soft silicone in the contact areas with the phone protects the device against scratching. 360 degree rotation allows you to adjust the position of the holder to individual needs: horizontally or vertically. Specification: Material: PC + acrylic + silicone Size: 101 x 106 x 118 mm Weight: 90 g Input: 5V/2A, 9V/1.67A Output power: 5W/7,5 W/10W/15W (15W only supports some LG phones) Suitable for: 4.7-7.0 inch mobile phones (width: 62-88 mm) Place of installation: air vent

The magnetic car holder dedicated to using in-car dashboard & smooth surface. It has built-in four magnetic forces that do not block the signal and guarantee reliable installation.

Selfie stick with tripod function and wireless remote control. Perfect for photography fans. It helps to capture the most important moments in life. Made of high-quality, stainless steel and ABS, it guarantees long-term and safe use. The compact size and lightweight foldable design make it easy to carry and store the selfie stick. Adjustable length: the stick unfolds, so you can adjust its length to your individual needs. In addition, it has three fold-out legs that ensure stability and allow you to take pictures from a distance. The portable remote control allows you to take pictures without holding the stick. The product connects to the device via Bluetooth technology. Specification:Material: stainless steel + ABSSize: 70 x 45 x 295 mm (unfolded heigh: 1.57 m)Weight: 310 gSuitable for: 4.5-7 inch mobile phones (grip range: 60-95 mm)Connection: Bluetooth 4.0Wireless remote control: yes

The Forcell Chrom III car holder is a practical accessory that will allow you to comfortably and safely use a smartphone while driving. Extendable clamps with wide spacing and a long arm with 360° rotation enable adjustment to individual needs. A 2-in-1 product with air vent and windshield mounting. Solid supportThanks to the Forcell holder, you will always have your phone close at hand during the ride. Its arms with the release button let you put the device in or out. The durable construction enables mounting the device vertically or horizontally—charging and headphone inputs will remain uncovered so you can use them comfortably the whole way through. Strong clamps will keep the smartphone in a stable position even during dynamic driving, and the soft foam protects your device from scratches. A good fitVarious adjustment options make it easy to adapt the holder to your own needs. It will prove helpful when sharing one car with several drivers. The arms spacing is so broad (40–110 mm) that you can easily attach smartphones or navigations of various sizes to it. The bottom legs will prevent the device from accidentally slipping. The long arm with 360° rotation allows you to turn the holder to obtain the right angle for your eyesight. Follow the navigation, scroll notifications, or switch songs on the screen in total safety for both yourself and the passengers. Easy mountingMade of a high-quality plastic holder that has chrome, aesthetic inserts gives you several mounting options. Thanks to the adjustable arm and the suction cup reinforced with an additional clamp, it can be placed on the windshield or on the smooth surface of the dashboard. However, if you want to minimize possible problems with visibility and thus increase safety, it is enough to dismount the arm from the holder and then place it in the air vent. In both cases, a solid clamping guarantees that the device will stay in place and not be damaged even on very bumpy roads. Specification:Color: BlackInstallation: Suction cup (windshield or smooth surface on the dashboard) and air ventArm spacing: 40–110 mmArm length: 150 mm

Magnetic car holder with adjustable arm. It allows for comfortable and safe use of a smartphone while driving. Mounted on the windshield or dashboard. 6 built-in magnets ensure a secure grip and make the handle extremely universal; to use it, just place the metal plate on the phone or a case. Adjustable angle of inclination of 240° allows you to adjust the parameters of the product to your own needs. An adjustable arm with a length of 11.7-16 cm enables precise adjustment of the position of the device within the line of sight. 360° rotation to change the position of the device for the convenience of its use, vertically or horizontally. A strong suction cup with a sticky gel ensures a stable fit on flat surfaces such as the windshield or dashboard. Set of two metal plates included.

The Forcell Regular car holder is a practical accessory that will allow you to comfortably and safely use a smartphone while driving. Extendable clamps with wide spacing and a 17 cm long arm enable adjustment to individual needs. A 2-in-1 product with air vent and windshield mounting. Solid supportThanks to the Forcell holder, you will always have your phone close at hand during the ride. Its arms with the release button let you put the device in or out. The durable construction enables mounting the device vertically—charging and headphone inputs will remain uncovered so you can use them comfortably the whole way through. Strong clamps will keep the smartphone in a stable position even during dynamic driving, and the soft foam protects your device from scratches. A good fitVarious adjustment options make it easy to adapt the holder to your own needs. It will prove helpful when sharing one car with several drivers. The arms spacing is so broad (38–107 mm) that you can easily attach smartphones or navigations of various sizes to it. Folding bottom legs will prevent the device from accidentally slipping. A long arm (17 cm) allows you to set the holder at eye level. Follow the navigation, scroll notifications, or switch songs on the screen in total safety for both yourself and the passengers. Easy mountingMade of a high-quality plastic holder gives you several mounting options. Thanks to the adjustable arm and the suction cup reinforced with an additional clamp, it can be placed on the windshield or on the smooth surface of the dashboard. However, if you want to minimize possible problems with visibility and thus increase safety, it is enough to dismount the arm from the holder and then place it in the air vent. In both cases, a solid clamping guarantees that the device will stay in place and not be damaged even on very bumpy roads. Specification:Color: BlackInstallation: Suction cup (windshield or smooth surface on the dashboard) and air ventArm spacing: 38–107 mmArm length: 170 mm The offer also includes a model with a 27 cm long arm and a model with mounting only to the air vent.

HOCO car holder CA40 Cool journey was created for every driver and makes the car journeys safe and comfortable. Well-thought design of the product provides its easy use and allows to install it on the dashboard, as well as on the windshield. HOCO car holder CA40 is a modern device, very compact, so it does not take up the space. The product, thanks to its unique design, does not disturb the aesthetic appearance of the car’s interior, either. With the HOCO car holder CA40 you can easily have the phone calls during driving and enjoy your journey in safety. The product faces the different needs of every customer and allows you to install it on the vehicle dashboard or windshield. HOCO car holder CA40 was made of lightweight and solid materials, so it provides both, comfort and safety, and guarantees that your device will be holding still while you are driving. The product has a wide-range compatibility and can be used with 58mm-82mm (4-6.5 inch) smartphones and GPS devices. Specification: Material: ABS + PC Size: 105*50*80mm Weight: 70g

The Forcell Oval car holder is a practical accessory that will allow you to comfortably and safely use a smartphone while driving. Extendable clamps with wide spacing and a 17 cm long arm enable adjustment to individual needs. A 2-in-1 product with air vent and windshield mounting. Solid supportThanks to the Forcell holder, you will always have your phone close at hand during the ride. Its arms with the release button let you put the device in or out. The durable oval construction enables mounting the device vertically—charging and headphone inputs will remain uncovered so you can use them comfortably the whole way through. Strong clamps will keep the smartphone in a stable position even during dynamic driving, and the soft foam protects your device from scratches. A good fitVarious adjustment options make it easy to adapt the holder to your own needs. It will prove helpful when sharing one car with several drivers. The arms spacing is so broad (38–107 mm) that you can easily attach smartphones or navigations of various sizes to it. The bottom legs will prevent the device from accidentally slipping. A long arm (17 cm) allows you to set the holder at eye level. Follow the navigation, scroll notifications, or switch songs on the screen in total safety for both yourself and the passengers. Easy mountingMade of a high-quality plastic holder gives you several mounting options. Thanks to the adjustable arm and the suction cup reinforced with an additional clamp, it can be placed on the windshield or on the smooth surface of the dashboard. However, if you want to minimize possible problems with visibility and thus increase safety, it is enough to dismount the arm from the holder and then place it in the air vent. In both cases, a solid clamping guarantees that the device will stay in place and not be damaged even on very bumpy roads. Specification:Color: BlackInstallation: Suction cup (windshield or smooth surface on the dashboard) and air ventArm spacing: 38–107 mmArm length: 170 mm The offer also includes a model with a 27 cm long arm and a model with mounting only to the air vent.

Car holder with wireless charging function of up to 15W. The built-in infrared sensor detects the device automatically. Mounted on the air vent. The intelligent infrared sensor detects the phone and the holder closes automatically. A firm fit ensures stabilization and safety of the phone even on uneven roads. After inserting the device, the wireless charging process will start automatically, which can reach a power of up to 15W. The 360-degree adjustment range allows you to adjust the parameters of the accessory to your own needs. Mounted to the air vent. Specification:Material: ABS + siliconeInput: 5V/2A, 9V/1,67AOutput power: 5W / 7.5 W / 10 W / 15W (15W only supports some LG phones)Fits: 4.5-7.0 inch cell phones (width: 63-100 mm)Place of installation: air ventSize: 74 × 120 × 108 mmWeight: 115 g

Držák do auta - TXR MAGNETICKÝ - 2 držák na sklo i mříž , šedá-černá 51030.

The Forcell Bracket holder assures convenient and safe use of car navigation or smartphone when driving. It has a adjustable arm that allows positioning the holder at different angles. The Forcell Bracket holder with a strong suction cup has high ranges of the adjustments. A long adjustable arm and rotation up to 360 degrees on a ball joint allow positioning the device to your needs. The holder is made of high-quality plastic, which guarantees durability and comfort of use. The inner side of clamps are coated with a material that protects the sides of the smartphone from scratches. The handle is equipped with clamps opening button and suction cup release button. Colour: Black Installation: Suction cup Max arms spacing: up to 95 mm Max arm length: 140 mm Rotation on the arm: 270 degree

FORCELL CARBON H-CT322 car holder for the dashboard. It is a magnetic phone holder that increases the comfort of travel and makes using the phone easy and safe. 6 built-in magnets provide a firm grip, preventing the smartphone from falling out, and make the holder extremely universal; to use it, just place a metal plate on the phone or case. 360° rotation allows you to precisely adjust the position of the phone to your needs, horizontally or vertically. Cable clip allows you to place the cable in it so that it does not get tangled and does not interfere with your travels. Extremely compact: the small size of the product does not block the view to the road and makes it easy to store when not in use. Two metal plates included.

Magnetic car holder for the air vent. It allows comfortable and safe use of a smartphone while driving. Small size does not block visibility. 6 built-in magnets ensure a secure grip and make the handle extremely universal; to use it, just place the metal plate on the phone or a case. 360° rotation ensures precise adjustment of the phone position to your own needs. Extremely compact: the small size of the product ensures good visibility and makes it easy to store when not in use. Two metal plates included.

Magnetic car holder for the ar vent - FORCELL CARBON B060. It allows for comfortable and safe use of a smartphone while driving. Built-in 4 magnets provide a firm grip, preventing the device from falling out while driving, and makes the handle extremely universal; to use it, place a metal plate on the device or a case. Compact size does not block visibility and makes it easy to store the product when not in use. Silicone inserts prevent scratching the air vent and protect the handle from falling out even on uneven roads. Set of two metal plates included.

The Forcell Bracket holder assures convenient and safe use of car navigation or smartphone when driving. 360-degree adjustment allows convenient horizontal or vertical positioning of the device. The holder is made of high-quality plastic, which guarantees durability and comfort of use. The inner side of clamps are coated with a material that protects the sides of the smartphone from scratches. The Forcell Bracket is equipped with clamps opening button and suction cup release button. Colour: Black Installation: Suction cup Max arms spacing: up to 95 mm Max arm length: 140 mm Rotation on the arm: 270 degree

Elegant gravity air vent car holder. Curved tempered glass panel gives them a futuristic design. Easy to one-hand operation. Thanks to the auto clip, you only have to put the phone inside and the clips automatically suit to your phone. Wide clips offer a steady grip without phone shaking. The inner clip is protected with silicone material that can prevent minor scratches on the phone cover. The holder is fully adjustable - offers full 360 view with easy 90 horizontal and vertical angle rotations. Easy access to home button and charging port makes easy charging them during travel. Key features: - gravity technology (auto clip) - triangular anti-shock design - 360-degree full viewing angle - taking/ placing with one hand - elastic silicone soft pads Specification: Install way: air outlet (compatible with 98% of car air vent types) Material: glass + aluminium alloy Size: 9,8 x 5,2 x 3,2 cm Weight: 85 g Technology: Oxidation Compatibility: devices with 4-6 inches screens and 1,1 cm thickness max Package type: box

Car holder with wireless charging. Mounted on the air vent. It allows you to safely use your smartphone while driving. Made of high-quality components it guarantees resistance to damage and affects long-term use. Allows wireless charging with a power up to 15 W. Compact, lightweight design makes it easy to store the product. SpecificationPower: 5 W/7.5 W/10 W/15 WMaterial: ABS + PCSize: 117 x 64 x 111 mmWeight: 108 gCompatibility: 4.5-7 inches phonesMounting location: air vent

Practical car holder designed to be mounted on the windshield or cockpit. It has an elegant design - the carbon motif makes your interior car luxurious.Universal useThe handle has a wide arm spacing (50-85 mm) and comes with devices with screen sizes from 3"- 6";.Highly adjustableThe handle has a 360 degree adjustment. Use the phone or navigate vertically or horizontally - as you like!Stable mountingThe handle is attached with a suction cup, which additionally has a locking clip. You can mount it to the windshield or the smooth surface of the dashboard. Silicone tabs protects against slipping out. The clamp release button makes it easy to remove the phone from the holder.Modern designThe Forcell HT1 handle is an accessory reminiscent of the futuristic carbon fiber. It looks great with the interior of a modern car.Features:Place of installation: windshield or dashboardRotation: 360 degreesCompatibility: 3"-6" devices

Magnetic car holder - HOCO CA59. Allows you to attach the device securely. It affects driving comfort and safety. Mounted to the air outlet. Made of high quality components - ABS, silicone and aluminum, the product is resistant to damage, thus ensuring long-term use. Built-in magnet provides a strong and solid grip, preventing the device from falling out during fast driving. The small size and lightweight design make it easier to store the product, and that the handle does not block visibility. Specification: Material: ABS + silicone + aluminum alloy Size: 65 * 39 * 55 mm Weight: 46g Mounting location: air outlet

Motorbike holder with baffle. Fastened with a zipper. It ensures the safety of using the smartphone while riding a motorcycle or scooter. Mounted to the motorcycle frame. The product is compatible with 4.8-5.5″ mobile devices. Waterproof – allows you to use your smartphone in difficult conditions, protecting the device from moisture and flooding. Fastened with a zipper facilitates quick installation of the device in the holder. Damage resistant material reduces the risk of damage and scratches. Equipped with a baffle to protect against the sun for good visibility of the smartphone screen. Available in three sizes: 4.8-5.5″, 5.5-6.3″, 6.4-8.0″. Specification:Material: aluminum + iron + rubber + ABS + PVC + EVACompatibility: with 4.8-5.5″ mobile devices

Baseus car holder for the air vent. It provides a strong fit, stabilization and safety of the phone even on a very difficult road. It has an improved clamp design on the air vent which makes installation even easier and makes the handle even more stable when attached. Compared to other handles, Easy Control does not use gravity to hold the device. The phone is blocked by hand – a strong clamp will keep the equipment in a stable position. Thanks to this solution, you can use the handle both in a vertical and horizontal position with one hand. To release the phone, simply press the orange button on the back of the holder. The transparent housing with metal arms provides a high-quality texture that matches the interior of cars. Abrasion-resistant silicone pads, inside the clamping arms, absorb pressure from braking and impacts to protect your phone. Mounting the handle does not distract and does not obstruct the view. It has a cutout for a cable that allows you to connect the charger even while driving. 360-degree adjustment allows you to set it in any position – depending on our convenience and preferences. Specification:Material: PC+ABSType of fastening: clampingPlace of installation: air ventCompatibility: 4.7"-6.7" mobile devices

Universal car holder for a smartphone. Can be mounted to the windshield or dashboard.  The handle allows convenient use of, among others smartphone navigation while traveling. Extendable clamps, a long adjustable arm with 360 degrees of rotation, and positioning the smartphone vertically or horizontally allow you to adjust your smartphone to individual needs. Convenient installation on the windshield or dashboard does not limit visibility while driving. Specification: Model: ZP-X0566Compatibility: devices with 4.7–6.8" screenArm spacing: 54.0–94.9 mmInstallation: windshield, dashboard (suction cup)Material: PC + ABS + steel + siliconeWeight: 280 g